Connecting To The Therapy Device; Connecting The Tubing - Philips DreamStation User Manual

Connecting to the Therapy Device
1. Place the therapy device and heated humidifier (with an empty water tank) on a firm, flat surface.
Caution: Do not move the humidifier while the water tank has water in it.
2. Line up the back of the therapy device to the front (top lid release latch side) of the heated humidifier.
3. Make sure the air outlet port on the therapy device lines up with the air inlet port on the humidifier (not shown).
4. Slide the two units together until they snap into place.
5. Make sure that the therapy device and the humidifier are completely seated against each other.
Connecting the Tubing
1. To attach the heated tube to the heated humidifier, line up the connector (1) at the top of the heated tube to the
top of the air outlet port (2) on the humidifier.
2. Press the tubing into place over the air outlet port until the tabs on the side of the tube click into place in the slots
on the sides of the outlet port.
3. If you are using a standard tube (not shown) instead of a heated tube, simply slide the tubing over the air outlet
port on the heated humidifier.
Important: Before each use, examine the tubing for any kinks, damage, or debris. If necessary, clean the tubing to
remove the debris. Replace any damaged tubing.
4