My Comfort - Philips DreamStation Go User Manual

Icon Text
Mask Fit

My Comfort

When you select My Comfort, you will be able to view the following screens. You
can change the settings in the setup menu. These screens will only display if they are
available and enabled on your device. If any of the below options are not visible, your
supplier did not enable those options. If a lock icon
indicates that your supplier has locked this setting and you cannot change it.
Icon Text
Ramp
Ramp time When you set the ramp time, the device increases the pressure
Flex
Mask type This setting allows you to adjust the level of air pressure relief
Description
Displays the value "100% minus Large Leak". Large Leak is the
percentage of time that the mask leak was so high that it is no
longer possible for the device to identify respiratory events with
statistical accuracy. Displays the value for the most recent 1 day.
Description
This displays the ramp starting pressure. You can increase or
decrease the ramp starting pressure in 0.5 cm H
from the value set on the ramp screen to the therapy pressure
setting over the length of time specified here.
This allows you to adjust the level of air pressure relief that you
feel when you exhale during therapy. Your supplier can enable
or disable this feature. When your supplier enables Flex, a level
will already be set for you on the device. You can increase or
decrease the setting from 1 to 3. The setting of "1" provides a
small amount of pressure relief, with higher numbers providing
additional relief.
based on the specific Philips Respironics mask. Each Philips
Respironics mask may have a "System One" resistance control
setting. Contact your supplier if you cannot find this resistance
setting for your mask.
is displayed on this screen, it
3. Therapy Device
O increments.
2
17