Starting The Device - Philips DreamStation Go User Manual

Starting the Device

1. Ensure power is supplied to the device. Tap anywhere on the display screen to
wake up the device.
2. Put on your mask assembly. Refer to the instructions supplied with the mask.
3. Tap the therapy button
py. The current delivered pressure will display on the screen. The therapy button is
only for therapy.
4. A small amount of mask leak is normal and acceptable. Correct large amount of
mask leaks or eye irritation by adjusting your mask headgear. See the instructions
provided with your mask for more information, or refer to the Check Mask Fit sec-
tion.
5. Tap the therapy button again to turn off the therapy. To turn off therapy when the
display screen is off, place and hold a finger on the display screen for three sec-
onds. Alternatively, tap anywhere on the display screen to wake up the display and
then tap the therapy button to turn off therapy.
Notes
• If you are using the device in a bed with a headboard, try placing the tubing over
the headboard. This may reduce tension on the mask.
• During therapy, if there is a power loss, the device will return to the home screen
once power is restored. You may resume therapy as needed.
1
# Feature
1 Therapy on/off button
2 Display Touchscreen
on top of the device to turn on airflow and begin thera-
3. Therapy Device
2
13