Advertisement
Suspensions
To remove the bearing seats from the chassis, use
the appropriate tool as shown in the figure.
N.B.
To remove the lower seating of the lower bearing just use a
screwdriver as a lever between the seating and the shell.
Titolo
Lower and upper seating from
the chassis
Top washer and upper bearing housing
After removing the upper seating, tilt the vehicle to
a side and take out the steering tube making sure
mudflaps have been removed and the calliper dis-
connected.
Rear
Removing the rear wheel
- Use a screwdriver as a lever between the drum
and the cover.
-Straighten the split pin and remove the cap.
-Remove the wheel acting on the central fixing
point.
WARNING
-ALWAYS USE NEW SPLIT PINS FOR REFITTING.
L
OWER AND UPPER SEATING FROM THE CHASSIS
Durata/Valore
Testo Breve (< 4000 car.)
Indirizzo Immagine
SUSP - 97
Advertisement
