Avaya 4500 Series Installation Manual page 42

Installing the Avaya Ethernet Routing Switch
3. 10Gig XFP slots
Figure 14: Avaya Ethernet Routing Switch 4526GTX-PWR
1. USB Port
2. Switch LEDs
3. 10Gig XFP slots
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look
into an optical fiber or connector port. Always assume that fiber-optic cables are connected
to a light source. For a translation of this statement, see
page 63.
Switch LED state indicators
Table 14: Switch LED state indicators
indications provided by LED color and fluctuation cues.
Table 14: Switch LED state indicators
Label
Pwr
Status
42 Installation
Color and Status
Green, steady The switch is receiving power.
Off The switch is not receiving power, either from an AC
power source or the redundant power supply (RPS).
Green, steady
6. Console Port
4. 10/100/1000 ports (LEDs above ports)
5. Shared SFP ports
6. Console Port
on page 42 describes the main switch LED state
Description
• During start-up: The power-on self-test (POST) is
complete and the switch is operating normally.
• After start-up: The switch is running the agent code
successfully.
Translations of safety messages
November 2010
on