Operation; Connecting The Charger - Leica GKL122 User Manual

Operation

Connecting the charger

WARNING:
3
Use the charger only indoors,
in dry rooms. Units which have
23
become wet and contain condensed
air must not be used.
During the charging process
avoid fast increasing of
ambient temperature.
Before using the unit for the first
time, ensure that it is standing firmly
or attach it so that it is not possible to
change the position of the unit
unintentionally. Connect the unit to
the mains supply either with the
mains cable supplied or if using in a
vehicle with the vehicle's electrical
system by using the vehicle cable
supplied.
English
If no battery is connected, only the
round operating lamp still remains
showing green following this function
control.
If the round operating lamp should
extinguish and the four triangular
battery lamps show a continuous red
light, it means that the unit has
detected a fault (see "Illuminated Dis-
play").
For a safe separation from
mains and if the charger is
not used for a longer period, the plug
of the mains cable and the plug of the
vehicle cable must be disconnected.
28
Supplementations
Pay attention to the correct
polarity of the cigarette lighter
when using older motor
vehicles (+ pole on centre
contact).
In case of a wrong polarity
the fuse of the charger must
be replaced by a field
technician.
For supply of charger via
vehicle connector only use
vehicle on-board supply
systems.
In case of power supply via
other systems (e.g. current-
limiting power supply units)
malfunctions could be the
result.
Charger Professional Series GKL122-1.0.1eu