Before Using The Calculator - Canon F-570SG User Instruction

Error Message
Arg ERROR
Dim ERROR
Solve ERROR

Before Using the Calculator

Check the current Calculation Mode
Be sure to check the status indicators that indicate the current
calculation mode (CPLX, SD... etc) and angle unit setting (Deg, Rad
Gra) before starting a calculation.
Return Calculation Mode to the initial setup
You can return the calculation mode to the initial default by pressing
Calculation Mode
Angle Unit
Exponential Display Format
Complex Number Display Format : a+bi
Fraction Display Format
Decimal Point Character
, and this action will not clear the variable memories.
Initialize the Calculator
When you are not sure the current calculator setting, you are
recommended to initialize the calculator (calculation mode "COMP",
angle unit "Degree", and clear replay and variable memories) by
performing the following key operations:
Cause
Improper use of an
argument.
• Under Matrix and Vector
mode, the dimension
(row, column) over three.
• An attempt to perform an
illegal matrix/vector
operation.
Can't get the result by
solve function.
(Mode)
Press
the location of the cause of
an error and make required
corrections.
Press
the location of the cause of
an error and make required
corrections.
Press
the location of the cause of
an error and make required
corrections.
: COMP
: Deg
: Norm 1, Eng Off
: a b/c
: Dot
13
Action
or to display
or to display
or to display
(All) .