Icom IC-M35 Service Manual page 13

¤ COMMON CONNECTION
JIG cable
Modified OPC-1668
[SP MIC] cap
¤ ADJUSTMENT SOFTWARE INSTALLATION
q Quit all applications if Windows is running.
w Insert the CD into the appropriate CD drive.
e Double-click the "Setup.exe" contained in the 'CS-M36/35
r The "Welcome to the InstallShield Wizard for CS-M36/35
t The "Choose Destination Location" will appear. Then click [Next>] to install the software to the destination folder.
(e.g. C:\Program Files\Icom\CS-M36)
y After the installation is completed, the "InstallShield Wizard Complete" will appear. Then click [Finish].
u Eject the CD.
i Program group 'CS-M36 ADJ' appears in the 'Programs' folder of the start menu, and 'CS-M36/35
desk top screen.
¤ ADJUSTMENT SOFTWARE SCREEN
Click to load the setting from the transceiver
Click to open the "I/O check window"
REFERENCE FREQUENCY
TX POWER (High)
TX POWER (A-High)
TX POWER (Low)
TX POWER (E-Low)
DEVIATION
(*)
(*)
RX SENSITIVITY
(*)
SQUELCH
RSSI
(*)
(The values shown in the above screen are example only. Each transceiver has their own values.)
*; NEVER MODIFY
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
OPC-478
to RS-232C port
(RS-232C type)
to USB port
OPC-478UC
(USB type)
ADJ ' folder in the CD drive.
" will appear. Click [Next>].
ADJ
5 - 2
PC
' icon appears on the
ADJ