Makita DA330D Technical Information page 6

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3A. Spiral bevel gear 6 and Spur gear 42 for DA330D
DISASSEMBLING
(1) Take out Spiral bevel gear 6 and Spur gear 42 as drawn in Fig. 5.
Fig. 5
1. Remove Key holder from
Housing set.
Key holder
4. Separate Gear housing section.
Gear housing
(2) Remove spiral bevel gear 6 as drawn in Fig. 6.
Fig. 6
1. Insert a set of 1R022 between Spur gear 42 and Ball bearing 608ZZ. Then, push Ball bearing 696ZZ
with Arbor press to seat the bearing on Spur gear 42.
Spur gear 42
1R022
2. Remove Spur gear 42 and Ball bearing 696ZZ using 1R279 and Arbor press. Ball bearing 608ZZ
remains on Spiral bevel gear 6 after this process. The bearing is removed with 1R269.
1R022
Spur gear 42 Ball bearing 696ZZ
2. Remove Set plates from Housing set
with small slotted screwdriver.
5. Remove Spur gear 42 together
with Spiral bevel gear 6 by tapping
Gear housing with a plastic hammer.
Spur gear 42 and
Spiral bevel gear 6
Ball bearing
696ZZ
1R022
1R279
3. Remove Housing R
Set plate (2pcs.)
Housing R
Ball bearing 608ZZ Spiral bevel gear 6
Ball bearing 608ZZ Spiral bevel gear 6
P 6/ 10
by unscrewing seven
3x16 Tapping screws.