8
Operator panel
The heat system is controlled by an operator panel with a display that shows operational information
A keypad is used for user interaction, that is selecting functions, navigating the menu system, and for parame-
ter settings. When the heat pump is turned on, the display shows the operational mode and the water tempera-
tures. The default settings are house heating/dhw in AUTO mode. For more information about the operator panel,
see the user manual.
Figure 8.
Layout of operator panel
8.1
Important parameters
•
Curve
•
Room
•
Adjust heat curve
•
Temperatures
•
Cooling
1
C
C
2
3
4
Position
Explanation
1
Display
2
Indicator
3
Power button
4
Keypad
Installation and service instructions VMGFI202 – 27