Mounting; Orientation; Rigging - Chauvet Led Shadow User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 8 of 16
Before mounting the product, read and follow the safety recommendations indicated in the
Safety Notes.
The LED Shadow™ may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
• Before deciding on a location for the product, always make sure there is easy access
to the product for maintenance and programming purposes.
• Make sure that the structure onto which you are mounting the product can support the
product's weight. See the
• When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss.
• When rigging the product onto a truss, use a mounting clamp of appropriate weight
capacity.
•
When power linking multiple products, mount the products close enough for power
linking cables to reach.
• The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Safety Cable
(such as CH-05
from Chauvet)
Flush Mounting
to Wall (Drywall
Screws x 4)
Technical Specifications for weight information.
Flush Mounting
Bracket
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Bracket Adjustment
Knob x 2
Mounting Bracket
LED Shadow™ User Manual Rev. 6