Dmx Linking; Configuration (Dmx); Dmx Starting Address; Dmx Channel Assignments And Values - Chauvet Led Shadow User Manual

DMX Linking

Configuration
(DMX)
DMX Starting
Address

DMX Channel Assignments and Values

Channel

3-CH

Page 10 of 16
The LED Shadow™ works with a DMX controller. Information about DMX is in the
CHAUVET® DMX Primer,
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Set the product in DMX mode to control with a DMX controller.
1. Connect the product to a suitable power outlet.
2. Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels the
product uses. If you choose a starting address that is too high, you could restrict the
access to some of the product's channels.
The LED Shadow™ uses 3 DMX channels, which defines the highest configurable
address to 510. If you are not familiar with the DMX protocol, download the DMX Primer
from www.chauvetlighting.com.
To select the starting address, do the following:
1. Press <MENU> repeatedly until Addr shows on the display.
2. Press <ENTER> and d001–510 will show on the display.
3. Use <UP> or <DOWN> to select the starting address.
4. Press <ENTER>.
Function
Mode
1
Strobe Mode Speed
(When Ch. 1 is 001
Auto Mode Speed
2
(When Ch. 1 is 040
No Function
(When Ch. 1 is 240
Intensity
3
which is available
Value
000 No function
001 039 Dimmer mode
040 079 Automatic mode 1
080 119 Automatic mode 2
120 159 Automatic mode 3
Automatic mode 4
160 199
200 239 Automatic mode 5
240 255 Sound-active
000 009 No strobe
039)
010 255 Strobe speed (0
000 255 Automatic mode speed (slow to fast)
239)
000 255 No function
255)
100
000 255 –0%
from the Chauvet website
Percent/Setting
–100%)
LED Shadow™ User Manual Rev. 6