Advertisement
Specifications
48 High bandwidth analog inputs (used for component video and composite video)
•
75Ohm terminated at all frequencies
Gold plated matched low impedance RCA jacks
1Vpp nominal input swing (Ypbpr) or 1.3Vpp (Cvbs) 4Vpp maximum (DC invariant)
DC rejection via capacitive coupling
Crosstalk < -80 dB
48 High bandwidth analog outputs (used for component video and composite video)
•
Source impedance 75 Ohms
Gold plated matched low impedance RCA jacks
All output sets individually controllable/switchable
High performance amplifier capable of driving over 300ft of coax cable per output
2V/V (video) gain to properly drive output load termination (zero effective gain at display)
-3dB bandwidth > 100 Mhz
6 Optical Digital audio inputs + 6 Optical Digital audio outputs
•
Optical digital audio inputs have built in shutters, no plugs needed
Selectable transcoding from coax digital audio
All outputs individually controllable/switchable
8 Coax Digital audio inputs + 8 Coax Digital audio outputs
•
Gold plated matched low impedance RCA jacks
AC coupled to protect all connected equipment
Capable of driving over 300ft of coax cables
Selectable transcoding from optical digital audio
All outputs individually controllable/switchable
IR receiver (front)
•
RS-232 control input (DB9 female) & RS-232 expansion output (DB9 male)
•
Internal design
•
Flash programmable micro controller enables ZeroKey remote technology
Ultra wide bandwidth integrated buffered t-switch matrix prevents crosstalk or signal distortion
Independent professional quality video amplifiers for best performance
High reliability capacitors and self resetting fuse protection for long life
Designed and manufactured in the USA
Housing
•
Black steel rack mountable housing 17" x 13" x 3.5" (2 RU)
Advertisement
