Advertisement
Left LED Display
(selected output)
U 1-16
H 1-16
CF
SZ
Left LED Display
(selected output)
U 1-16
C 1-8
O 1-6
H 1-16
CF
SZ
Right LED display for configuration menu:
1.
C
Clear memory. Press the right front panel key and hold for 6 seconds to reset all Zerokey IR
codes to factory defaults and put the switch into basic mode.
2.
L
LED OFF. Press and hold the right switch to black out the LED display. Any button will restore.
3.
P
Power OFF. Press and hold the right switch to turn off CMX. Any button will restore power.
4.
U O/F
Reserved, has no effect
5.
1 O/F
Debug control (do not use). Press & hold the right switch to turn on/off
6.
2 O/F
Debug control (do not use). Press & hold the right switch to turn on/off
7.
3 O/F
Power up default. When this control is switched from F to O, it will save the current state
of all outputs to flash memory. At power up if this control is O, the saved state will be loaded at power
up. If it is F, all outputs will be disabled on power up.
Basic mode
Right LED Display
(selected input)
0-16
0-16
C-U , O/F
0-40
Advanced mode
Right LED Display
(selected input)
0-16
C 0-8 or O 1-6
Digital audio coax control. When C is shown on the right
C 0-8 or O 1-6
Digital audio TOSLINK control. When C is shown on the
0-16
Control for HDMI outputs (if HDMI switch is connected)
C-U, O/F
0-41
Description
Control for all outputs types EXCEPT HDMI
Digital coax outputs are linked to outputs 1-8
Digital coax inputs are linked to inputs 1-8
Digital TOSLINK outputs are linked to outputs 9-14
Digital TOSLINK inputs are linked to inputs 9-14
Transcoding is disabled in basic mode.
Control for HDMI outputs (if HMX switch is connected)
Config menu, please see setting below
Zerokey programming mode, please see Zerokey section
Description
Component video control
it means you are selecting the coaxial audio input. When
O is display you are selecting TOSLINK audio input.
right it means you are selecting the coaxial audio input.
When O is display you are selecting TOSLINK audio
Config menu, please see setting below
Zerokey programming mode, please see Zerokey section
input.
Advertisement
