Disabling Vxlans - Cisco Nexus 9000 Series Configuration Manual

Disabling VXLANs

Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
The following example shows the output for a static MAC address configured for VXLAN VTEP:
switch# show mac address-table static interface nve 1
Legend:
VLAN
---------+-----------------+--------+---------+------+----+------------------
* 501
* 601
Disabling VXLANs
Procedure
Step 1
Step 2
Step 3
Step 4
Cisco Nexus 9000 Series NX-OS VXLAN Configuration Guide, Release 7.x
26
Command or Action
configure terminal
mac address-table static mac-address
vni vni-id interface nve x peer-ip
ip-address
exit
copy running-config startup-config
show mac address-table static
interface nve x
* - primary entry, G - Gateway MAC, (R) - Routed MAC, O - Overlay MAC
age - seconds since last seen,+ - primary entry using vPC Peer-Link,
(T) - True, (F) - False
MAC Address Type
0047.1200.0000 static
0049.1200.0000 static
Command or Action
configure terminal
no feature vn-segment-vlan-based
no feature nv overlay
copy running-config startup-config
Purpose
Enters global configuration mode.
Specifies the MAC address pointing to the remote
VTEP.
Exits global configuration mode.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
(Optional)
Displays the static MAC addresses pointing to the
remote VTEP.
age Secure NTFY Ports
- F F nve1(33.1.1.3)
- F F nve1(33.1.1.4)
Purpose
Enters global configuration mode.
Disables the global mode for all VXLAN bridge
domains
Disables the VXLAN feature.
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to the
startup configuration.
Configuring VXLAN