Vxlan Bud Node Over Vpc Topology Example - Cisco Nexus 9000 Series Configuration Manual

VXLAN Bud Node Over VPC

VXLAN Bud Node Over VPC Topology Example

• Enable the required features:
• Configuration for PIM anycast RP.
• VLAN configuration
• VPC configuration
• Infra VLAN SVI configuration
• Route-maps for matching multicast groups
feature ospf
feature pim
feature interface-vlan
feature vn-segment-vlan-based
feature hsrp
feature lacp
feature vpc
feature nv overlay
In this example, 1.1.1.1 is the anycast RP address.
ip pim rp-address 1.1.1.1 group-list 225.0.0.0/8
In this example, tenant VLANs 101-103 are mapped to vn-segments.
vlan 1-4,101-103,2000
vlan 101
vn-segment 10001
vlan 102
vn-segment 10002
vlan 103
vn-segment 10003
vpc domain 1
peer-switch
peer-keepalive destination 172.31.144.213
delay restore 180
peer-gateway
ipv6 nd synchronize
ip arp synchronize
interface Vlan2
no shutdown
no ip redirects
ip proxy-arp
ip address 10.200.1.252/24
no ipv6 redirects
ip router ospf 1 area 0.0.0.0
ip pim sparse-mode
hsrp version 2
hsrp 1
ip 10.200.1.254
VXLAN Bud Node Over VPC Topology Example
Cisco Nexus 9000 Series NX-OS VXLAN Configuration Guide, Release 7.x
131