Procedure 7.1 - Replacing A Cover - Precor RBK 815 Service Manual

Procedure 7.1 - Replacing a Cover

Cover Removal
1. Remove two screws, one each side, from the front of the top cover. Remove the
top cover. See Diagram 7.1.
Diagram 7.1 - RBK 815 Covers
Left Side Cover
2. Remove three screws from the right side cover, remove the left side cover.
3. Remove three screws from the left side cover, remove the right side cover
4. Remove three screws, one each side and one in the rear, from the rear cover.
Remove the rear cover
5. Remove three screws from the seat frame cover. Remove the seat frame cover.
See Diagram 7.2.
Diagram 7.2 - RBK 815 Covers
Kick plate
RBK 815 Recumbent Cycle
Top Cover
Rear Cover
Seat Frame Cover
Page 33