Note:This service manual is only for professional service personnel’s reference. Before servicing the unit, please read the following items carefully. 1. SAFETY INSTRUCTION AND GENERAL INSTRUCTION Before servicing and aligning this equipment, please read the following “X-RAY RADIATION PRECAUTION” , “SAFETY PRECAUTION” and “PRODUCT SAFETY NOTICE”. 1.1 X-RAY RADIATION PRECAUTION 1)...
characteristics are often passed unnoticed by a visual inspection and the X-RAY RADIATION protection afforded by them cannot necessarily be obtained by using replacement components rated for higher wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual and its supplement electrical components having such features are shaded on the schematic diagram and the parts list.
3.2 OSCILLOGRAPH 3.3 HIGH-VOLTAMETER 3.4 DIGITAL MULTIMETER 3.5 AC ATTACK PULL TEST EQUIPMENT 3.6 SCAN frequency signal generator BT-3 4 Debugging instruction 4.1 enter into the factory debugging menu use to the remote control(RC-A23),follow to the blow model enter into the factory: DISPLAY →...
Page 6
4.7 Use white balancer to rectify the white balance under following conditions color temperature:12000K+8MPCD x =0.270± 0.008 Y=0.283±0.008; dark space: 4.5nit, bright space: 60nit Note:1. While the colour saturation changed from maximum to minimum, if the dark balance appears changeable,adjust RY.TV and BY.TV (P12) to let it coincide with white balance. 2.
Page 7
4.16 the factory menu adjustment model pre-set item Pre-set model P1-60 V SIZE 60HZ field amplitude V SHIFT 60HZ field center H-PHASE 60HZ H-center V LINE 60HZ V-line V SC 60HZ field S-correct V COMP field amplitude compensate fixed L.BLK Left blanking fixed R.BLK...
Page 8
SUB-COL Sub-colour fixed SUB-SHP Sub-definition fixed SUB-TINT Sub-tint fixed VOL.FIL Volume control ADC filter fixed OSD.COT OSD contrast fixed OSD.HPOS OSD center fixed Line AFC loop gain and sync fixed gate switch VIF SW IF3=45.75MHZ fixed SIF SW Sound IF0=4.5MHZ fixed VIDEO LEVEL VIDEO LEVEL...
Page 9
FBP BLK SW Horizontal blanking switch fixed,0=inside produce;1=FBP and inside logic “and” DC REST DC recover rate fixed,0=100% 1=107% Field frequency division CD.MODE fixed,0=auto model CORE GAIN Noise reduction fixed,0=OFF 1=MIN 3=MAX γ.GAMA r-correct fixed,0=OFF RGB DC output RGB TEMP.SW fixed temperature speciality A.MONI SW...
Page 10
AV selection AV input select(3=AV1/AV2/S/DVD) MTS IC selection 0=nothing,1=72700 2=AN5832 V.OFF.MOTE Turn off model 0=discharge,1=close PWR.MEM Turn on model 0=standby,1=auto turn on,2=memory 1115 select LV1115 fixed,0=nothing;1=have No signal background BLCK GROND 0=nothing 1/3=blue background;2=black background selection South America and North N/PN 0=south america;1=north america America selection...
Page 13
Function introduction to pin function Reference function Reference voltage voltage SIF output 2.28 PIF input1 2.86 PIF AGC 2.61 PIF input 2 2.86 SIF input 3.11 IF GND FM filter 2.64 RF AGC output 4.55 FM filter/sound output 2.25 Video output 2.30 Sound output 2.24...
Page 14
POWER H=OFF 5.00 L=ON Turn voltage 1.73 5.00 output Mute, high 5.00 Level availability I2C DATA 5.00 x T2 4.50 I2C CLOCK 5.00 x T1 2.70 AN7522 Pins function function function power GND input CH1+ output CH2 input volume CH1- output CH1+ output Stand-by GND (CH2 output)
PART LIST PART# DESCRIPTION LOCA.NO. 100-TS27660-10 NXT2766 100-TS27660-01 TS2766 123-30001-04 TWIST WIRE 335-2942R-00U CRT A68CPBB02X01 477-12904-00U DEGAUSS COIL DX-29! 488-10012-00 BATTERY 7#(made in china 491-752J0-02 POWER CORD UL 604-TS27667-00 OWNER'S MANUAL(NEXXTECH,CAN) 611-E66C0J0H4A FRONT CABINET ASS'Y (ABS V0 SILVER WHITE 03...