JetCat P80 Instruction Manual page 36

SPDCTRL SW0
ACT
SPDCTRL SW2
ACT
With the Airspeed Sensor connected to the ECU – by moving the AUX
switch to the Off (SW0) position, while maintaining a model air speed >
40km/h, the following options are available:
Hold-Speed
DISABLED/NONE
Turbine OFF
LrnSpeed Lo/Hi
Lrn Speed Lo
Lrn Speed Hi
With the Airspeed Sensor connected to the ECU – by moving the AUX
switch to the AutoOff (SW2) position, while maintaining a model air speed
> 40km/h, the following options are available:
Hold-Speed
DISABLED/NONE
LIN-Speed Ctrl
3-StepSpdCtrl
= momentarily sustains the current flight speed
= no function, thrust control remains active
= turbine will immediately shut off
= learn minimum or maximum flight speeds
= learn minimum flight speed
= learn maximum flight speed
= momentarily sustains the current flight speed
= no function, thrust control remains active
= linear Cruise Control
= three speed Cruise Control
Page 36/39