JetCat P80 Instruction Manual page 23

Turbine engine
Hide thumbs Also See for P80:
Table of Contents

Advertisement

RUN (reg.)
Turbine in the normal running state; the throttle stick will regulate turbine
thrust.
During this operant condition, the green OK LED will illuminate,
indicating that pilot has control.
RUN (reg.) continues, until the turbine is switched off.
AutoOff
The AUX switch placed in the AutoOff position.
Turbine automatically adjusts to 55,000 RPM and remains at that RPM
for approximately six (6) seconds, before transition to the next state
(SlowDown).
During this state, the fuel shut-off valve is closed and the fuel pump is
SlowDown
stopped.
The green OK LED blinks, indicating SlowDown
This condition will continue, until all of the following parameters are met:
• Turbine speed less than 800 RPM
• EGT is less that 100 degrees C.
• The AUX switch is moved to the Off position and throttle trim is
moved to the minimum position
Once these conditions are met, turbine proceeds to Off.
Manual
ECU in manual mode, with yellow Standby/Manual LED blinking.
The fuel valve is opened and the throttle stick controls the fuel pump.
(See page 18 for details).
Speed Control mode -- only active when the air speed sensor is
SpeedCtrl
connected. Regulates model flight speed.
Page 23/39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents