December 21st, 1995
5.7.3. Paper Feed Rollers, Paper Size Sensor, By-pass Feed Sensor, and
Relay Connector
[C]
A: Feed rollers (1 screw each)
B: Paper size sensor (2 hooks, 1 connector)
C: Relay connector to the optional 100 sheet cassette (1 screw, 1 connector)
Paper feed rollers [A]: Turn the roller shaft as shown in the diagram, so that
the screw heads can seen from the front. Then remove the rollers.
The relay connector to the optional 100 sheet cassette [C] should be installed
as shown in the diagram (the triangle mark has to be at the left hand side of
the connector.
By-pass feed sensor: See below.
REPLACEMENT AND ADJUSTMENT
5-27
PAPER FEED
[A]
H515R636.wmf
h515r022.wmf
[B]