Paper Roll Replacement - Sharp EL-2192RII Operation Manual

Cleaning the printing mechanism If the print become dull after long time
usage, clean the printing wheel according to the following procedures:
1. Remove the printer cover and the ink roller.
2. Install the paper roll and feed it until it comes out of the front of the
printing mechanism.
3. Put a small brush (like a tooth brush) lightly to the printing wheel and
clean it by pressing
4. Put back the ink roller and the printer cover.
Notes:
 Never attempt to turn the printing belt or restrict its movement while
printing. This may cause incorrect printing.
 Do not rotate the printing mechanism manually, this may damage the
printer.
Never insert paper roll if torn. Doing so will cause paper to jam.
Always cut leading edge with scissors first.
1. Insert the leading edge of the paper roll into the opening. (Fig. 1)
2. Turn the power on and feed the paper by pressing
3. Lift the attached metal paper holder up and insert the paper roll to the
paper holder. (Fig. 3)
DO NOT PULL PAPER BACKWARDS AS THIS MAY CAUSE DAMAGE
TO PRINTING MECHANISM.
12 | P a g e
.
. (Fig. 2)