Non-Add/Subtotal Key; Multiplication Rate Conversion Key; Division Rate Conversion Key - Sharp EL-2192RII Operation Manual

Non Add When this key is pressed right after an entry of a number in
the Print mode, the entry is printed on the left-hand side
with the symbol "#".
This key is used to print out numbers not subjects to
calculation such as code, date, etc.
Subtotal Used to get subtotal(s) of additions and/or subtractions.
When pressed following the
printed with the symbol "◊" and the calculation may be
continued.
By pressing this key even in the Nonprint mode, the displayed
number is printed with the symbol "P".
This key is used:
 To store the conversion rate.
 Obtains a value by multiplying a given number with a specified
conversion rate.
 To recall the presently stored rate for check. Press
clear the calculation register and reset an error condition, then press
. The conversion rate is printed with the
This key is used to obtain a value by dividing a given number with a
specified conversion rate.
9 | P a g e
or key, the subtotal is
first to