Gravely Zoom Bagger Owner's And Operator's Manual page 12

3/8" Washer & Bow-Tie
Locking cotter Pin (Not Shown)
Figure 14
CAUTION: MAKE SURE the heat resistant
(smooth side) side of the mesh bags are facing
the unit.
INSTALL BAG ON FRAME (FIGURE 15)
1. Thread the bag frames (23) through the sleeve on
the open end of the mesh bag (2).
2. Install the 3/8 x 1/2 x 3" plastic tubes (24) on the
ends of the bag frames and push then ends
together. on the ends of the bag frame and push
the ends together.
NOTE: The rope handle on the bottom of the bag will
point to the outside when the bag is assembled correctly.
Clevis
Pin
Install 3/8 x 1/2 x 3" plastic tube (24)
on each end of frame and push the
ends together.
12
Thread bag frame (23) through sleeve
in mesh bag (2).
Figure 15