Mercedes-Benz S-CLASS 2017 Operator's Manual page 333

tire in this instance. Damaged tires and a tire
pressure that is too low can significantly
impair the vehicle's braking and driving char-
acteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
Tire pressure reached
G
WARNING
A tire temporarily sealed with tire sealant
impairs the driving characteristics and is not
suitable for higher speeds. There is a risk of
accident.
You should therefore adapt your driving style
accordingly and drive carefully. Do not exceed
the specified maximum speed with a tire that
has been repaired using tire sealant.
The maximum permissible speed for a tire
sealed with tire sealant is 50 mph (80 km/h).
The upper part of the TIREFIT sticker must be
affixed to the instrument cluster in the driver's
field of vision.
If a tire pressure of 180 kPa (1.8 bar/26 psi) has
been attained after five minutes:
Switch off the tire inflation compressor.
X
Unscrew the filler hose from the valve of the
X
faulty tire.
Tire sealant may escape when the filler hose is
unscrewed.
Stow the tire sealant bottle and the tire infla-
X
tion compressor.
Pull away immediately.
X
Stop after driving for approximately ten
X
minutes and check the tire pressure with the
tire inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
G
WARNING
If the required tire pressure is not reached
after driving for a short period, the tire is too
badly damaged. The tire sealant cannot repair
the tire in this instance. Damaged tires and a
tire pressure that is too low can significantly
impair the vehicle's braking and driving char-
acteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
In cases such as the one mentioned above, con-
tact an authorized Mercedes-Benz Center. Or
call 1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
Correct the tire pressure if it is still at least
X
130 kPa (1.3 bar/19 psi). See the Tire and
Loading Information placard on the B-pillar on
the driver's side or the tire pressure table in
the fuel filler flap for values.
To increase the tire pressure: switch on the
X
tire inflation compressor.
To reduce the tire pressure: depress pres-
X
sure release button E next to pressure gauge
F.
When the tire pressure is correct, unscrew the
X
filler hose from the valve of the sealed tire.
Tire sealant may escape when the filler hose is
unscrewed.
Screw the valve cap onto the tire valve of the
X
sealed tire.
Pull the tire sealant bottle out of the tire infla-
X
tion compressor.
The filler hose remains attached to the tire
sealant bottle.
Drive to the nearest qualified specialist work-
X
shop and have the tire changed there.
Have the tire sealant bottle replaced as soon
X
as possible at a qualified specialist workshop.
Have the tire sealant bottle replaced every
X
four years at a qualified specialist workshop.
Flat tire
331
Z