Mercedes-Benz S-CLASS 2017 Operator's Manual page 123

Memory function in the rear compart-
ment
Important safety notes
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
General notes
The settings for the rear seat and the front-
passenger seat can be stored using the rear-
compartment memory function.
If the indicator lamp in the v button is not
R
lit, store the rear seat settings.
If the indicator lamp in the v button lights
R
up, store the front-passenger seat and rear
seat settings. Both the front-passenger and
rear seat are taken into account with this set-
ting. Depending on the equipment in the vehi-
cle, two or three memory positions can be
stored for the front-passenger and rear seats.
Storing settings
General notes
With the memory function in the rear, you can
store up to three different settings, e.g. for three
different people.
Memory function in the rear compartment
The following settings are stored as a single
memory preset:
position of the seat, backrest and head
R
restraint
active multicontour seat: the seat cushions of
R
the backrest as well as the contour of the
backrest in the lumbar and shoulder regions
seat heating: distribution of the heated sec-
R
tions of the seat cushion and backrest if the
indicator lamp in the v button is not lit
The following settings are also stored to a mem-
ory position, if the indicator lamp in the v
button is lit:
position of the footrest for the front-
R
passenger seat, if available
position of the screen, if available
R
Vehicles without rear reclining seat
The power supply or the ignition must be
switched on so that the front-passenger seat
can be selected (
Selects rear-compartment seat
Press the v button repeatedly until the
X
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
Adjust the rear seat accordingly
X
( page 102).
Y
Press memory button M and one of the stor-
X
age position buttons 1, 2 or 3 within three
seconds.
The settings are stored in the selected stor-
age position.
page 146).
Y
121
Z