Mercedes-Benz S-CLASS 2017 Operator's Manual page 294

Features
292
To install the insert: make sure that base ;
X
of the cup holder is in the upper position.
Place the cup holder insert into the recess in
X
the rear seat armrest such that button : is
facing forwards.
Press the cup holder insert down.
X
Press outer ring = of the cup holder insert,
X
until the cup holder insert engages audibly.
Temperature controlled cup holder in
the rear compartment
Example: Sedan
Cup holder
:
Switch
;
The temperature-controlled cup holder can be
used to keep cold drinks cold and hot drinks hot.
When you use the warming function, the metal
insert of the cup holder is heated. Therefore, do
not touch the cup holder insert.
Turn the SmartKey to position 2 in the ignition
X
lock ( page 145).
Y
To switch on the cooling function: press
X
and hold button ; until the blue indicator
lamp on the button lights up.
To switch on the heating function: press
X
and hold button ; until the red indicator
lamp on the button lights up.
To switch off the function: press and hold
X
button ; until the indicator lamp on the but-
ton goes out.
The rubber mat can be removed for cleaning.
Clean with clear, lukewarm water only.
Do not use hard or sharp objects to clean the
cup holder. Use only a soft cloth to clean it.
Sun visors
Overview
G
WARNING
If the mirror cover of the vanity mirror is folded
up when the vehicle is in motion, you could be
blinded by incident light. There is a risk of an
accident.
Always keep the mirror cover folded down
while driving.
Mirror light
:
; Additional sun visor
= Bracket
Retaining clip, e.g. for a car park ticket
?
Vanity mirror
A
Mirror cover
B
Vanity mirror in the sun visor
Mirror light : only functions if the sun visor is
clipped into retainer = and mirror cover B has
been folded up.