Safety Instructions - Advantech IDS-3121W Series User Manual

21.5” industrial open frame monitor
Table of Contents

Advertisement

Safety Instructions

1.
Read these safety instructions carefully.
2.
Retain this user manual for future reference.
3.
Disconnect this equipment from all AC outlets before cleaning. Use a damp
cloth to clean the equipment. Do not use liquid or spray detergents.
4.
For plugable equipment, the power outlet socket should be located near the
equipment and easily accessible.
5.
Protect the equipment from humidity.
6.
Place this equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7.
The openings of the enclosure are for air convection. Prevent the equipment
from overheating. Do not cover the openings.
8.
Ensure that the voltage is correct before connecting the equipment to a power
outlet.
9.
Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10.
All cautions and warnings on the equipment should be noted.
11.
If idle for a long duration, disconnect the equipment from the power source to
avoid damage from transient overvoltage.
12.
Never pour liquid into an opening. This may cause fire or electrical shock.
13.
Never open the equipment. For safety reasons, the equipment should only be
opened by qualified service personnel.
14.
If one of the following occurs, have the equipment checked by service person-
nel:
The power cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment is malfunctioning or does not function according to the user
manual.
The equipment has been dropped or damaged.
The equipment shows obvious signs of breakage.
15.
Do not store this equipment in an environment where the temperature fluctuates
below -20 °C (-4 °F) or above 60 °C (140 °F) because this could damage the
equipment. The equipment should be stored in a controlled environment.
16.
The sound pressure level at the operator's position does not exceed 70 dB (A)
in accordance with IEC 704-1:1982.
DISCLAIMER: These instructions are provided according to IEC 704-1. Advantech
disclaims all responsibility for the accuracy of any statements contained herein.
Caution! Information regarding the adapter output rating (12 V
is provided in the user manual to assist with adaptor selection if a power
adapter is not shipped with the unit.
v
IDS-3121W User Manual
, 5 A/18 W min)
DC

Advertisement

Table of Contents
loading

Table of Contents