2.2
Rear Mount Assembly
Attach the mount plate to the rear of the IDS-3121W panel using the M5 screws pro-
vided. See the image below for reference.
Note!
To protect the electrical circuits, cover the edge of the touchscreen with
insulation tape (e.g., Kapton), taking care not to cover the active display
area.
2.3
Packing List
1 x VGA cable 15P (M), 1.8 meter
1 x USB-A(M)/USB-A (M), 1.8 meter
1 x Cable clamp
1 x Cable clamp screw
1 x 60 W 12 V
1 x Power cord (upon request)
1 x DVI cable, 2.0 meter (upon request)
1 x RS-232 9P/9P, M/F cable, 1.8 meter (upon request)
Note!
The accessory cables listed above may differ according to SKU.
power adapter (upon request)
DC
7
IDS-3121W User Manual