Page 1
User Manual IDS-3117 Series 17" Industrial Open Frame Monitor...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Class I, Division 2, Groups A, B, C and D indoor hazards. Technical Support and Assistance Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Page 4
Warnings, Cautions and Notes Warning! Warnings indicate conditions, which if not observed, can cause personal injury! Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery.
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Introduction The Advantech IDS-3117 series is a brand new Industrial Open Frame Monitor, designed to meet the needs of customers who want quick and easy integration with Advantech Embedded Box Computers, such as ARK and DSA lines. Advantech offers two different versions of IDS-3117 to meet different demands: IDS-3117 series...
Specifications Note! The IDS-3117 series offers the following features and meets precise specifications. Unless otherwise noted, all the information listed below is subject to change without prior notification. Model IDS-3117 IDS-3117E Size 17" LED panel 17" CCFL panel Resolution 1280 x 1024 (SXGA)
Rear Mount Assembly SOP Use the M3 screws to attach and tighten as follows. Cable Clamp A cable clamp also comes with Open Frame Monitor to fix the power cable, see below. Cable Clamp with IDS-3117 IDS-3117 User Manual...
Page 17
Cable Clamp with IDS-3117E A cable tie for the USB cable is included in the accessory box, see below: IDS-3117 User Manual...
1 x cable clamp 1 x cable clamp screw 1 x cable tie CD-ROM for IDS-3117 Series 1 x 60 W DC12V Power Adapter (optional order) 1 x Power Cord (optional order) 1 x DVI cable 2.0 meter (optional order) ...
OSD Functions (IDS-3117 Series) The OSD of the IDS-3117 display (1280 x 1024 resolution) was selected to illustrate examples below: Buttons Description Power Turn the monitor power ON or OFF Menu Activate the OSD menu Exit menu Auto Automatically adjust the clock, phase...
OSD Functions for IDS-3117E Series 3.2.1 OSD Main Menu: Push the MENU Key 3.2.2 OSD Lock Press the "Right" key and "Menu" key simultaneously to lock the OSD key. 3.2.3 OSD Unlock Press the "Right" key and "Menu" key simultaneously again to unlock the OSD key. IDS-3117 User Manual...
3.2.10 Reset Adjustment Touch Drivers The T/S driver CD-ROM is in the accessory box and comes with the product. It is also available online at the Advantech website as follows: http://support.advantech.com/support/default.aspx IDS-3117 User Manual...
If experiencing trouble with the monitor, or it fails to operate correctly, please refer to the following instructions before calling the Advantech service center. If unable to cor- rect the faults using the instructions below, then please contact the distributor or the services/repair center.
Need help?
Do you have a question about the IDS-3117 Series and is the answer not in the manual?
Questions and answers