Page 1
User Manual IDS-3212 Series 12.1" Industrial Panel Mount Monitor...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Page 3
Class I, Division 2, Groups A, B, C and D indoor hazards. Technical Support and Assistance Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Page 4
Warnings, Cautions and Notes Warning! Warnings indicate conditions, which if not observed, can cause personal injury! Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery.
Page 5
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Introduction The Advantech IDS-3212 series is a brand new Industrial Panel Mount Monitor, designed to meet the needs of customers who want quick and easy integration with Advantech Embedded Box Computers, such as ARK and DSA lines. Advantech offers three different versions of IDS-3212 to meet different demands: IDS-3212...
Specifications Note! The IDS-3212 series offers the following features and meets precise specifications. Unless otherwise noted, all the information listed below is subject to change without prior notification. Model IDS- 3212 (XGA) IDS-3212 (SVGA) IDS-3212E (SVGA) Size 12.1" LED panel 12.1"...
VGA x 1; DVI-D x 1; VGA x 1; DVI-D x 1; VGA x 1; 12 VDC 12 VDC Jack x 1;USB 12 VDC Jack x 1;USB Jack x 1; USB x1; x1; RS-232 x 1 (USB x1; RS-232 x 1 (USB RS-232 x 1(USB &...
Using the M4 25L screw and panel mount clamp to attach and tighten as shown in the below figure. Back View Front View Cable Clamp A cable clamp also comes with Open Frame Monitor to fix the power cable, see picture below. Cable Clamp with IDS-3212 Series IDS-3212 User Manual...
A cable tie for the USB cable is included in the accessory box, see below: Packing List 1 x VGA cable 15P(M) 1.8 meter 1 x USB-A(M)/USB-A(M) 1.8 meter 4 x Panel-mount clamps 4 x Panel-mount clamper screws: M4_25L ...
OSD Functions (IDS-3212 Series) The OSD of the IDS-3212 display (1024 x 768 and 800 x 600 resolution) was selected to illustrate examples below: Buttons Description Power Turn the monitor power ON or OFF Menu Activate the OSD menu Exit menu...
OSD Functions for IDS-3212E Series 3.2.1 OSD Main Menu: Push the MENU Key 3.2.2 OSD Lock Press the "Right" key and "Menu" key simultaneously to lock the OSD key. 3.2.3 OSD Unlock Press the "Right" key and "Menu" key simultaneously again to unlock the OSD key. IDS-3212 User Manual...
3.2.10 Reset Adjustment Touch Drivers Available online at the Advantech website as follows: http://support.advantech.com/support/default.aspx IDS-3212 User Manual...
If you are experiencing trouble with the monitor, or it fails to operate correctly, please refer to the following instructions before calling the Advantech service center. If unable to correct the faults using the instructions below, then please contact the dis- tributor or the services/repair center.