Page 1
User Manual IDS-3110 Series 10.4" Industrial Open Frame Monitor...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Page 3
Class I, Division 2, Groups A, B, C and D indoor hazards. Technical Support and Assistance Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Page 4
Warnings, Cautions and Notes Warning! Warnings indicate conditions, which if not observed, can cause personal injury! Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery.
Page 5
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Introduction The Advantech IDS-3110 series is a brand new Industrial Open Frame Monitor, designed to meet the needs of customers who want quick and easy integration with Advantech Embedded Box Computers, such as ARK and DSA lines. Advantech offers two different versions of IDS-3110 to meet different demands: IDS-3110 series...
Specifications Note! The IDS-3110 series offers the following features and meets precise specifications. Unless otherwise noted, all the information listed below is subject to change without prior notification. Model IDS-3110 IDS-3110E IDS-3110 XGA Size 10.4" LED panel 10.4" LED panel 10.4" LED panel...
Page 15
VGA x 1; DVI-D VGA x 1; DVI-D VGA x 1; 12 x 1; 12 VDC x 1; 12 VDC VDC Jack x 1; Jack x 1; Jack x 1; USB x1; RS-232 USB x1; RS-232 USB x1; RS-232 (USB & RS-232 are reserved for the connection to enable touch usage only) Keys: Menu, Up, Down, Auto...
Cable Clamp A cable clamp also comes with Open Frame Monitor to fix the power cable, see picture below. Cable Clamp with IDS-3110 Cable Clamp with IDS-3110E IDS-3110 User Manual...
Page 19
A cable tie for the USB cable is included in the accessory box, see below: Packing List 1 x VGA cable 15P(M) 1.8 meter 1 x USB-A(M)/USB-A(M) 1.8 meter (only for models with touch screen) 4 x Panel-mount clamps ...
OSD Functions (IDS-3110 Series) The OSD of the IDS-3110 display (800 x 600 resolution) was selected to illustrate examples below: Buttons Description Power Turn the monitor power ON or OFF Menu Activate the OSD menu Exit menu Auto Automatically adjusts the clock, phase...
OSD Functions for IDS-3110E Series 3.2.1 OSD Main Menu: Push the MENU Key 3.2.2 OSD Lock Press the "Right" key and "Menu" key simultaneously to lock the OSD key. 3.2.3 OSD Unlock Press the "Right" key and "Menu" key simultaneously again to unlock the OSD key. IDS-3110 User Manual...
OSD Functions for IDS-3110 XGA series IDS-3110 XGA series are equipped with 1024 x 768 display resolution and the follow- ing OSD features: Buttons Description Power Turn the monitor power ON or OFF Activate the OSD menu Menu Select Automatically adjusts the clock, phase Auto/Exit H-position and V-position Move the selector to the previous option...
Page 37
3.3.1.5 Extra Input Select DDC/CI Reset IDS-3110 User Manual...
Page 38
Layer 1 Layer 2 Layer 3 Comment Default Value Contrast Adjusts contrast Brightness Adjusts brightness (backlight) Standard Sport Luminance Movie ECO Mode Standard Game Internet Text Sets dynamic contrast ratio Adjusts clock latency of output Depends on the Clock capture window input resolution Depends on the Adjusts clock phase of output...
Display current source infor- Depends on the Information H. Frequency mation input source V. Frequency Touch Drivers The touch screen driver is available on line at the Advantech website. Use the follow- ing link to access the driver: http://support.advantech.com/support/default.aspx IDS-3110 User Manual...
If experiencing trouble with the monitor, or it fails to operate correctly, please refer to the following instructions before calling the Advantech service center. If unable to cor- rect the faults using the instructions below, then please contact the distributor or the services/repair center.
Need help?
Do you have a question about the IDS-3110 Series and is the answer not in the manual?
Questions and answers