Specifications - Sony MDR-10RBT Quick Start Manual

Wireless
Stereo Headset
Casque
stéréo sans fil
Auriculares estéreo
inalámbricos
MDR-10RBT
©2013 Sony Corporation Printed in China
http://www.sony.net/
English
WARNING
To reduce the risk of electrical shock, do not open the
cabinet. Refer servicing to qualified personnel only.
Information
FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN
CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.
POUR LES CONSOMMATEURS AUX ÉTATS-UNIS. NON
APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE
DE QUÉBEC.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
This equipment must not be co-located or operated in
conjunction with any other antenna or transmitter.
Note
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has very
low levels of RF energy that are deemed to comply
without testing of specific absorption ratio (SAR).
4-477-580-12(1)
Reference Guide
Guide de référence
Guía de referencia
The BLUETOOTH word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Sony
Corporation is under license.
The N Mark is a trademark or registered trademark of NFC
Forum, Inc. in the United States and in other countries.
Microsoft, Windows and Windows Vista are registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Macintosh and Mac OS are trademarks of Apple Inc.,
registered in the U.S. and other countries.
The aptX ® mark and the aptX logo are trade marks of CSR
plc or one of its group companies and may be registered
in one or more jurisdictions.
Other trademarks and trade names are those of their
respective owners.
Precautions
On BLUETOOTH communication
BLUETOOTH wireless technology operates within a range
of about 10 meters (30 feet).
Maximum communication range may vary depending on
obstacles (human body, metal, wall, etc.) or
electromagnetic environment.
The antenna is built into the unit as illustrated in the
dotted line. The sensitivity of the BLUETOOTH
communication will improve by turning the direction of
the built-in antenna to the connected BLUETOOTH
device.
The communication distance shortens when the
obstacles are between the antenna of the connected
device and this unit.
Location of
built-in
antenna
The following conditions may affect the sensitivity of
BLUETOOTH communication.
There is an obstacle such as a human body, metal, or
wall between this unit and BLUETOOTH device.
A device using 2.4 GHz frequency, such as a wireless
LAN device, cordless telephone, or microwave oven, is
in use near this unit.
Because BLUETOOTH devices and wireless LAN
(IEEE802.11b/g) use the same frequency, microwave
interference may occur and resulting in communication
speed deterioration, noise, or invalid connection if this
unit is used near a wireless LAN device. In such a case,
perform the following.
Use this unit at least 10 m (30 ft) away from the
wireless LAN device.
If this unit is used within 10 m (30 ft) of a wireless LAN
device, turn off the wireless LAN device.
Install this unit and BLUETOOTH device as near to each
other as possible.
Microwaves emitting from a BLUETOOTH device may
affect the operation of electronic medical devices. Turn
off this unit and other BLUETOOTH devices in the
following locations, as it may cause an accident:
where inflammable gas is present, in a hospital, train,
airplane, or a petrol station
near automatic doors or a fire alarm
This unit supports security capabilities that comply with
the BLUETOOTH standard to provide a secure connection
when the BLUETOOTH wireless technology is used, but
security may not be enough depending on the setting.
Be careful when communicating using BLUETOOTH
wireless technology.
US
We do not take any responsibility for the leakage of
information during BLUETOOTH communication.
Connection with all BLUETOOTH devices cannot be
FR
guaranteed.
A device featuring BLUETOOTH function is required to
conform to the BLUETOOTH standard specified by
ES
Bluetooth SIG, Inc. and be authenticated.
Even if the connected device conforms to the above
mentioned BLUETOOTH standard, some devices may
not be connected or work correctly, depending on the
features or specifications of the device.
While talking on the phone hands free, noise may occur,
depending on the device or communication environment.
Depending on the device to be connected, it may require
some time to start communication.
If you cannot operate the unit
Reset the unit.
Insert a small pin, etc., into the hole, and push it until
you feel a click. Pairing information is not deleted.
If you are still unable to operate the unit even after the
resetting operation above, initialize the unit as follows.
Turn off the unit by pressing the POWER button for more
than 2 seconds. Then, press and hold the POWER button
and the / button together for about 7 seconds.
The indicator (blue) flashes 4 times, and the unit is reset
to the factory settings. All pairing information is deleted.
On charging the unit
This unit can be charged using USB only. Personal
computer with USB port, or USB Charging AC Power
Adaptor AC-UD11 (sold separately) is required for
charging.
This unit cannot connect via BLUETOOTH while charging.
Note on static electricity
Static electricity accumulated in the body may cause
mild tingling in your ears. To minimise the effect, wear
clothes made from natural materials.
Others
Do not place this unit in a place exposed to humidity,
dust, soot or steam, subject to direct sunlight, or in a car
waiting at a traffic signal. It may cause a malfunction.
Using the BLUETOOTH device may not function on
mobile phones, depending on radio wave conditions
and location where the equipment is being used.
If you experience discomfort after using the BLUETOOTH
device, stop using the BLUETOOTH device immediately.
Should any problem persist, consult your nearest Sony
dealer.
Listening with this unit at high volume may affect your
hearing. For traffic safety, do not use this unit while
driving or cycling.
Do not put weight or pressure on this unit as it may
cause the unit to deform during long storage.
Do not subject the unit to excessive shock.
Clean the unit with a soft dry cloth.
Do not expose the unit to water. The unit is not
waterproof.
Remember to follow the precautions below.
Be careful not to drop the unit into a sink or other
container filled with water.
Do not use the unit in humid locations or bad weather,
such as in the rain or snow.
Do not get the unit wet.
If you touch the unit with wet hands, or put the unit in
a damp article of clothing, the unit may get wet and
this may cause a malfunction of the unit.
The earpads may deteriorate due to longterm storage or
use.
If you have any questions or problems concerning this
unit that are not covered in this manual, please consult
your nearest Sony dealer.

Specifications

General
Communication System
BLUETOOTH Specification version 3.0
Output
BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m (30 ft) 1)
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS
Compatible BLUETOOTH Profiles 2)
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
HFP (Hands-free Profile)
HSP (Headset Profile)
3)
Supported Codec
SBC 4) , AAC 5) , aptX
Supported content protection method
SCMS-T
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
Included items
Wireless stereo headset (1)
micro-USB cable (approx. 50 cm (1.64 ft)) (1)
Connecting Cord (approx. 1.2 m (3.94 ft)) (1)
Carrying pouch (1)
Reference Guide (this sheet) (1)
Quick Start Guide (1)
Other documents (1 set)
Recommended accessory
USB Charging AC Power Adaptor: AC-UD11 (sold separately)
1) The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity,
antenna's performance, operating system, software
application, etc.
2) BLUETOOTH standard profiles indicate the purpose of
BLUETOOTH communication between devices.
3) Codec: Audio signal compression and conversion format
4) Subband Codec
5)
Advanced Audio Coding
Wireless Stereo Headset
Power source
DC 3.7 V: Built-in lithium-ion rechargeable battery
DC 5 V: When charged using USB
Mass
Approx. 210 g (7.41 oz)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Usage hours
Music playback time: Max. 17 hours
Communication time: Max. 17 hours
Standby time: Max. 450 hours
Charging time
Approx. 2.5 hours
Charging temperature
5 °C to 35 °C (41 °F to 95 °F)
Receiver
Type
Closed, Dynamic
Driver units
40 mm
Frequency response
5 Hz - 40 kHz (when using the supplied connecting cord)
Maximum input
1,000 mW (when using the supplied connecting cord)
Impedance
40 Ω (1 kHz) (when using the supplied connecting cord)
Sound pressure sensitivity
100 dB/mW (when using the supplied connecting cord)
Microphone
Type
Electret condenser
Direction characteristic
Omni directional
Effective frequency range
100 Hz – 4,000 Hz
System requirements for battery
charge using USB
Personal Computer with pre-installed with any of the
following operating systems and USB port:
Operating Systems
(when using Windows)
Windows ® 8 / Windows ® 8 Pro
Windows ® 7
Home Basic / Home Premium / Professional / Ultimate
Windows Vista ® (Service Pack 2 or later)
Home Basic / Home Premium / Business / Ultimate
Windows ® XP (Service Pack 3 or later)
Home Edition / Professional / Media Center Edition 2004 /
Media Center Edition 2005
(when using Macintosh)
Mac OS X (version.10.3 or later)
Design and specifications are subject to change without notice.
Français
AVERTISSEMENT
Pour éviter tout risque d'électrocution, n'ouvrez pas le
coffret. Ne confiez les réparations qu'à un technicien qualifié.
Information
Le présent appareil est conforme aux CNR d'Industrie
Canada applicable aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
Cet équipement est conforme aux limites d'exposition aux
rayonnements énoncées pour un environnement non
contrôlé et respecte les règles les radioélectriques (RF) de
la FCC lignes directrices d'exposition dans le Supplément C
à OET65 et d'exposition aux fréquences radioélectriques
(RF) CNR-102 de l'IC. Cet équipement émet une énergie RF
très faible qui est considérée conforme sans évaluation du
débit d'absorption spécifique (DAS).
La marque de mot BLUETOOTH et les logos sont la
propriété de Bluetooth SIG, Inc. et l'utilisation de ces
marques par Sony Corporation est effectuée sous licence.
N Mark est une marque commerciale ou une marque déposée
de NFC Forum, Inc. aux États-Unis et dans d'autres pays.
Microsoft, Windows et Windows Vista sont des marques
déposées ou des marques de commerce de Microsoft
Corporation aux États-Unis et/ou dans les autres pays.
Macintosh et Mac OS sont des marques de commerce de
Apple Inc., déposées aux États-Unis et dans d'autres pays.
La marque aptX ® et le logo aptX sont des marques
commerciales de CSR plc ou d'une des sociétés de son
groupe, et ils peuvent être déposés dans une ou plusieurs
juridictions.
Les autres marques commerciales et noms commerciaux
appartiennent à leurs propriétaires respectifs.
Précautions
Communication BLUETOOTH
La technologie BLUETOOTH sans fil fonctionne dans un
rayon d'environ 10 mètres (30 pieds).
La portée de communication maximale peut varier en
fonction des obstacles (personnes, éléments métalliques,
murs, etc.) ou de l'environnement électromagnétique.
L'illustration ci-dessous indique l'emplacement de l'antenne
intégrée sur l'appareil. La sensibilité de la communication
BLUETOOTH pourra être améliorée en modifiant l'orientation
de l'antenne intégrée du périphérique BLUETOOTH.
La distance de communication est réduite en cas
d'obstacles présents entre l'antenne du périphérique
connecté et cet appareil.
Emplacement
de l'antenne
intégrée