6 Flash Programmer Mode
(6) The firmware update has completed when the LEDs light as below.
LED1
(blue) or
(green)
l
l
LED2
(green)
l
LED3
(green)
l
LED4
(green)
l
(7) Set SW7 to OPEN and press the RESET/START switch to restart the S5U1C17001H.
After completing the operation and the LEDs are as follows;
LED1
(blue) or
(green)
l
l
LED2
(red)
l
LED3
(red)
l
LED4
(red)
l
or after pressing and releasing the RESET/START switch, if the LEDs are as follows;
LED1
(white)
LED2
(white)
LED3
(white)
LED4
(out)
l
the firmware update may have failed for some reason.
If a malfunction occurs during a firmware update and the S5U1C17001H does not operate normally, please contact
our sales office.
18
Seiko Epson Corporation
S5U1C17001H USER MANUAL
(ICDMINI VER1.0 and VER1.1)