Table of Contents
Advertisement
Part 2 - Remote Setup
VA Box Setup
VA Box can only analyze the video from the camera
using H.264 and H.265..
Registration
You can register VA Box at remote locales.
• Title: Edit the VA Box's name.
• MAC Address: Displays the VA Box's MAC address
registered to the NVR.
• Address: Displays the VA Box's IP address registered
to the NVR.
• Model: Indicates the VA Box's model.
• Scan: Select to scan and register the device
connected to the NVR.
19
Device Scan
Scan the device under Registration - Scan.
• No.: Select the registered VA Box number and click the
Add Box button to register the camera.
• MAC Address: Displays the scanned device's MAC
address.
• Address: Displays the scanned device's IP address.
• Model: Indicates the device model.
• Registered Device MAC Address: Displays the MAC
address of the NVR to have registered VA Box.
• Status: The "Registered" indicates the VA Box is
registered to the NVR and "Not registered" indicates
the VA Box is not registered to the NVR.
Setup
Configure VA Box-related settings.
• Title: Displays the scanned device's name.
• Camera: Select the camera to analyze the video. Only
one camera can set for each VA Box channel.
The video analytics may not be supported
depending on the model.
• Analytic Type: Select one among People Counting,
HeatMap and Queue Management. A single video
analysis function is available for each VA Box channel.
Advertisement
Table of Contents
