Resetting The System - Sony MHC-V50D Operating Instructions Manual

Depending on the order in which
• •
you connect the TV and the
system, the system may be muted
and "MUTING" lights up on display
of the unit. If this happens, turn on
the TV first, then the system.
Set the speakers setting of the TV
• •
(BRAVIA) to Audio System. Refer to
the operating instructions of your
TV on how to set the TV.
The sound is output from both the
system and the TV.
Mute the sound of the system or
• •
the TV.
Change the speaker output on the
• •
TV to TV speaker or Audio System.
The Control for HDMI function
does not work properly.
Check the connection with the
• •
system (page 17).
Enable the Control for HDMI
• •
function on the TV. For details,
refer to the operating instructions
of your TV.
Wait a while, then try again. If you
• •
unplug the system, it will take
a while before operations can
be made. Wait for 15 seconds or
longer, then try again.
Make sure the TV connected to
• •
the system support the Control for
HDMI function.
The type and number of devices
• •
that can be controlled by the
Control for HDMI function is
restricted by the HDMI CEC
standard as follows:
•
— Recording devices (Blu-ray Disc
recorder, DVD recorder, etc.): up
to 3 devices
•
— Playback devices (Blu-ray Disc
Player, DVD player, etc.): up to
3 devices (this system uses one
of them)
•
— Tuner-related devices: up to
4 devices
•
— Audio system (receiver/
headphone): up to 1 device
(used by this system)
Party Chain
Party Chain function cannot be
activated.
Check the connections
• •
(page 49).
Make sure the audio cables are
• •
connected correctly.
"PARTY CHAIN" is flashing on the
display.
You cannot select AUDIO IN
• •
function if you make connection
 (page 49) during Party Chain
function. Select other function
(page 51).
Touch PARTY CHAIN on the unit.
• •
Restart the system.
• •
Party Chain function does not
work properly.
Turn off the system. Then, turn it
• •
back on again to activate the Party
Chain function.

Resetting the system

If the system still does not operate
properly, reset the system to factory
default settings.
Use the keys on the touch panel of
the unit to perform this operation.
1
Unplug the AC power cord (mains
lead), then plug it back in.
2
Press  to turn on the system.
63
GB