Dvd/Hdd Section - FUNAI HDR-A2835D Service Manual

< DVD/HDD Section >
Note: If an error occurs, a message with the error number appears on the screen.
Message Error No. Error Description
04-50
Disc error
04-51
03-50
03-52
03-53
03-54
Recording
error
03-55
03-56
03-57
03-60
02-50
02-51
02-52
02-53
02-54
System error
02-55
02-56
02-57
02-58
02-59
Recording Error
Renewal error at This code is output when there is a control information writing failure
ejecting disc due to tray being open during writing or disc loading.
Disc includes still This code is output upon attempt to write data (finalizing disc protect
picture data, etc.) on a disc including a still picture.
Recording error This code is output when recording error caused by media error
caused by media occurs, e.g.,stopping recording during attempting to record on a
error scratched disc.
This code is output when tray open/close error occurs. Also, when
Loader error the tray open error occurs at F/E and when the recovery fails even if
the B/E retries.
This code is output when a DVD operation error occurs during
Poor media
copying.
Control information
This code is output when a chip (EMMA) outputs unusual data while
error and control data
recording and the control information writing fails.
error
This code is output when video writing fails while copying at high
Writing error (video)
speed.
This code is output when a number of errors occur:
Ex.1) When Outplay list creation fails.
Ex.2) When the system can't take the title information which should
General error
be written on the disc.
Ex3) When starting to copy, recording is paused and restarted but,
after the recording pause, recording start fails.
This code is output when an HDD operation error occurs (HDD
Device error
recording error), while copying at high speed or constant speed.
This code is output when recording is attempted on a non -
Unrecordable disc
recordable disc such as a CD or DVD-ROM.
Erasing error (all This code is output when an error occurs erasing entire VR playlist,
titles) HDD playlist or HDD originals.
This code is output when protected pre-existing information that
Disc protection failure
should be on a disc is missing (VR disc protection error).
This code is output when HDD formatting occurs in maintenance
Format failure
mode.
Abnormal loader This code is output when an appropriate DVD drive is not connected.
Abnormal HDD This code is output when a [PLAY], [STOP], [REC], [MENU] or [LIST]
mount button is pressed while HDD is not functional.
Changing status
This code is output when, during dubbing from HDD or DVD to VCR,
failure during VCR
playback cannot be initiated or playback cannot be discontinued.
dubbing
Abnormal VCR This code is output when a VCR mechanism abnormality occurs.
mechanism After the error message is displayed, the power turns off.
This code is output when fan locking (over 30 seconds) is detected.
Fan lock
After the error message is displayed, the power turns off.
This code is output when an F/E hang-up event occurs. After the
F/E hang-up
error message is displayed, the power turns off.
This code is output when HDD hang-up event occurs. After the error
HDD hang-up
message is displayed, the power turns off.
Error message
Error No.
03-50
Error Example
1-11-2 E434AFIS