GEAR OIL BOTTLE
2.
Allow the used oil to drain
completely, then install an oil
pump adapter in the oil drain hole.
If water or contaminated (milky-
colored) oil flows out the drain
hole when the bolt is removed,
have the outboard motor checked
by and authorized Honda Marine
dealer.
3.
Add oil through the oil drain hole
until it flows out the oil level hole,
then install the oil level bolt and
the oil drain bolt.
OIL LEVEL BOLT TORQUE:
3.4 N·m (0.35 kgf·m , 2.5 lbf·ft)
Avoid losing more than 30 cm
US oz, 1,1 Imp oz) while reinstalling
the drain bolt.
OIL DRAIN BOLT TORQUE:
3.4 N·m (0.35 kgf·m , 2.5 lbf·ft)
MAINTENANCE
Starter Rope Check
STARTER ROPE
(1
Check the starter rope every 6
months or after every 50 hours of
outboard motor operation.
Replace the rope if it is frayed.
53