Philips HQ6730 User Manual page 14

EnglisH
16
2 2
1 1
1 1
gel/lotion has been released to allow the shaving
heads to move smoothly over your face again.
2 Reduced shaving performance
Cause 1: the shaving heads are dirty. The shaver
,
has not been cleaned immediately after use
and/or has not been rinsed long enough and/or
the water used to rinse the shaver was not hot
enough
Solution 1: clean the shaver thoroughly before
,
you continue shaving. See chapter 'Cleaning and
maintenance'.
Cause 2: long hairs are obstructing the shaving
,
heads.
Solution 2:
,
1 Press the release button and open the shaving
unit.
2 Turn the wheel anticlockwise (1) and remove
the retaining frame (2).
3 Clean the cutters and guards.
Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it
may take several weeks before optimal shaving
performance is restored.
4 Remove the hairs with the brush supplied.
5 Put the shaving heads back into the shaving unit.
Put the retaining frame back into the shaving
unit, press the wheel and turn it clockwise.
6 To prevent long hairs from obstructing the
shaving heads, remove the shaving heads once a
month and clean them with the brush supplied.
Cause 3: the shaving heads are damaged or worn.
,
Solution 3: replace the shaving heads. See
,
chapter 'Replacement'.