Gardena 1242 Operating Instructions Manual
Gardena 1242 Operating Instructions Manual

Gardena 1242 Operating Instructions Manual

Programming unit

Advertisement

Quick Links

GARDENA
D
Betriebsanleitung
Programmiereinheit
GB
Operating Instructions
Programming Unit
E
Manual de instrucciones
Unidad de programación
S
Bruksanvisning
Programmeringsenhet
DK
Brugsanvisning
Programmeringsenhed
®
Art. 1242

Advertisement

Table of Contents
loading

Summary of Contents for Gardena 1242

  • Page 1 GARDENA ® Art. 1242 Betriebsanleitung Programmiereinheit Operating Instructions Programming Unit Manual de instrucciones Unidad de programación Bruksanvisning Programmeringsenhet Brugsanvisning Programmeringsenhed...
  • Page 2: Table Of Contents

    Please keep these operating instructions in a safe place. Contents 1. Where to Use Your GARDENA Programming Unit ... 2. For Your Safety ..........
  • Page 3: For Your Safety

    2. For Your Safety Only alkaline batteries of the type 9 V IEC 6LR61 should be used to attain the maximum running time of 1 year. We recommend e.g. the manufacturers Varta and Energizer. v To prevent data transfer errors, the battery must be replaced in good time.
  • Page 4: Putting Into Operation

    Battery condition in the Control Unit : If the battery capacity is exhausted while the Control Unit is con- nected, then the symbol Batt. ext. will start to blink as soon as data has been transferred (Read) and continues blinking until the Control Unit is disconnected from the Programming Unit.
  • Page 5: Operating Your Programming Unit

    5. Operating Your Programming Unit Structure of the 3 Programme Levels MAIN LEVEL There are three programme levels: DISPLAY Main Level : TIME AND DAY • After all programming has been completed: MENU – the current time and current day are displayed –...
  • Page 6 Watering Programmes ( Level 2) Creating watering Prerequisite : you must have entered the current time and current day. programmes : For reasons of clarity, we recommend that you record the data for your Irrigation Valves in the watering plan in the appendix of the Operating Instructions before you begin entering watering data in the Programming Unit.
  • Page 7 7. (a) Watering cycle every 2nd or 3rd day : Set the arrow ê to 2nd or 3rd using the keys 7. (a) (for example 3rd = every 3rd day) and confirm by pressing the Ok key. The watering programme is saved. The watering cycle (for example 3rd ) and the preview for the week (for example Mo, Th, Su ) are displayed for 2 seconds.
  • Page 8 Transferring Watering Programmes Data can only be transferred if both the Programming Unit and the Control Unit are properly equipped with a 9 V battery. The Programming Unit must also be set to the main level. Connect the Control Unit The Control Unit must be connected to the Programming Unit in to the Programming Unit : order to transfer the watering programmes.
  • Page 9: Trouble-Shooting

    The changed manual watering time is saved in the Program- ming Unit and the main level is displayed. Tip : If you have questions about programming the Programming Unit, please do not hesitate to contact GARDENA Service. 6. Trouble-Shooting Fault...
  • Page 10: Putting Out Of Operation

    Transfer programme data Control Unit. to Control Unit. In the event of other faults please contact GARDENA Service. Repairs should only be carried out by GARDENA service centres or dealers authorised by GARDENA. 7. Putting Out of Operation Wintering...
  • Page 11: Service / Warranty

    9. Service / Warranty Warranty GARDENA guarantees this product for 2 years ( from date of purchase). This guarantee covers all serious defects of the unit that can be proved to be material or manufacturing faults. Under warranty we will either replace the unit or repair it free of charge if the following conditions apply: •...
  • Page 12 We expressly point out that, in accordance with the product liability law, we are not liable for any damage caused by our units if it is due to improper repair or if parts exchanged are not original GARDENA parts or parts approved by us, and, if the repairs were not carried out by a GARDENA Service Centre or an authorised specialist.
  • Page 13 93 / 68 / EG EU Retningslinier : EU Tillverkarintyg Hinterlegte Dokumentation: GARDENA Technische Dokumentation Undertecknad firma Husqvarna AB, 561 82 Huskvarna, Sweden, intygar härmed E. Renn 89079 Ulm att nedan nämnda produkter överensstämmer med EU:s direktiv, EU:s säkerhets- standard och produktspecifikation. Detta intyg upphör att gälla om produkten änd-...
  • Page 14 start time run time Prog. 7: 30 0: 30 17: 30 0: 20 22: 30 1: 10 4: 00 0: 15 –:– –:– –:– –:– start time run time Prog. 7: 30 0: 30 17: 30 0: 20 22: 30 1: 10 4: 00 0: 15...
  • Page 15 South Africa (Pty.) Ltd. Lautatarhankatu 8 B / PL 3 Belgium GARDENA Nederland B.V. P.O. Box 11534 00581 HELSINKI GARDENA Belgium NV / SA Postbus 50176 Vorna Valley 1686 info @ gardena.fi Sterrebeekstraat 163 1305 AD ALMERE Phone: (+ 27) 11 315 02 23...

Table of Contents