Advertisement
SET PAGER OFF
With this feature you can have the option of turning off the pager to save battery.
1. Remove all the pagers from the chargers
2. At the
"set pager off"
3. Pager off ? will appear on display
4. Press Send, all pagers that have received the signal will blink for 2 seconds
OUT OF RANGE (FACTORY DEFAULT: OFF)
With this feature, the coasters will beep when taken out of range of the transmitter to
inform the guest that they are too far away and will miss their page. The beeping will
automatically stop when they step back within range.
Be sure you have all your pagers before performing this procedure.
TURNING THE OUT OF RANGE ON
• Remove all the pagers from the charging unit or unplug the power supply that is connected
to the first charging base.
"Set Out of Range"
• At the
OFF.
or
"ENTER"
• Press the
you that they received the new code.
• Press
"CANCEL"
press
"ENTER"
menu, press the
key. After sending the signal, all the coasters will light up once to tell
key to exit the system programming menu.
"ENTER"
key to select the out of range
ON
9
Advertisement
