Control Dial - Panasonic DC-GH5 Owner's Manual

2. Getting Started/Basic Operations
Setting the operation methods of the front dial and rear dial
∫
> [Custom] >
MENU
[Assign Dial (F/SS)]
[Rotation (F/SS)]
[Exposure Comp.]
[Dial Operation Switch
Setup]

Control Dial

Rotating the control dial:
Selection of items or setting of values etc., is performed.
• The operation of rotating the control dial is illustrated as below in
this owner's manual.
Example: When rotating the control dial to the left or right:
[Operation] > [Dial Set.]
Assigns the operations of the aperture value and shutter speed
in Manual Exposure Mode.
[ F SS]:
Assigns the aperture value to the front dial, and the shutter
speed to the rear dial.
[ SS F]:
Assigns the shutter speed to the front dial, and the aperture
value to the rear dial.
Changes the rotation direction of the dials for adjusting the
aperture value and shutter speed.
[ ]/[
Assigns the Exposure Compensation to the front dial or rear
dial so that you can directly adjust it.
[ ] (Front Dial)/[
Sets the items to be assigned temporarily to the front/rear dials
when you press the function button to which [Dial Operation
Switch] is assigned.
[ ] ([Front Dial Operation])/[
• Items that can be set are as follows.
– [Photo Style] (P208)
– [Filter Effect] (P78,
– [Aspect Ratio] (P205)
– [AF Mode] (P91)
– [6K/4K PHOTO] (P116)
– [Highlight Shadow]
• [Highlight Shadow] uses the two dials.
47
]
] (Rear Dial)/[OFF]
] ([Rear Dial Operation])
– [i.Dynamic]
210) – [i.Resolution]
– [Flash Mode]
– [Flash Adjust.]
– [Sensitivity]
(P212)
– [White Balance]
(P213)
(P213)
(P156)
(P158)
(P107)
(P109)