Panasonic DC-GH5 Owner's Manual page 160

6. Stabilizer, Zoom and Flash
3
Select the menu.
>
MENU
[Wireless]
[Wireless Channel]
[Wireless Setup]
4
Press 3/4 to select an item and then press [MENU/SET].
• Press [DISP.] to fire a test-flash.
A Firing Mode
B Flash output
C Luminosity ratio
[Firing Mode]
[TTL]:
[AUTO]
[MANUAL]:
[OFF]:
[External
[Flash Adjust.]
Flash] ¢1
Set the flash output of the camera manually when [Firing Mode] is set to [TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
[Firing Mode]
[TTL]:
[AUTO]
[MANUAL]:
[OFF]:
[A Group]/
[Flash Adjust.]
[B Group]/
Adjust the output of the wireless flashes manually when [Firing Mode] is set to
[C Group]
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the wireless flashes when [Firing Mode] is set to
[MANUAL].
• You can set from [1/1] (full brightness) to [1/128] in steps of 1/3.
¢1 Not available when [Wireless FP] is set to [ON].
¢2 This option is not displayed when the flash (DMW-FL200L: optional) is attached to the
camera.
(P55)
[Rec] > [Flash]
Select [ON].
Select the channel you have set for the wireless flashes in
2
step .
Proceed to step
The camera automatically sets the output.
¢2 : Flash output is set by the external flash.
Set the luminosity ratio of the external flash manually.
The flash on the camera side emits only communication light.
The camera automatically sets the output.
¢1
: The wireless flashes automatically set the output.
Set the luminosity ratio of the wireless flashes manually.
The wireless flashes of the specified group will not fire.
4
.
160