Panasonic DC-GH5 Owner's Manual page 243

9. Using Menu Functions
[Save/Restore Camera Setting]
Save the camera's setup information to the card. Since saved setup information can be
imported to the camera, you can apply the same setup to more than one camera.
• Save/load setup information using the card inserted to the card slot 1.
Saves the camera's setup information to the card.
• To save new information, select [New File]; to overwrite an existing file,
select that file.
• When [New File] has been selected, the name of the file to be saved is
displayed on the screen.
[Save]
[Change the
[Load] Loads the setup information on the card to the camera.
[Delete] Deletes the setup information on the card.
• The setup information of the menu items below cannot be saved/loaded.
[Creative Video] • [V-LogL View Assist]
[Motion Picture] • [LUT HDMI Display] of [HDMI Rec Output]
[Custom]
[Setup]
• Only the setup information for this model can be loaded.
• You can save up to 10 sets of setup information to one card.
[No.Reset]
Settings: [Slot 1]/[Slot 2]
Reset the file number of the next recording to 0001.
• When recording is performed after resetting this item, the folder number is updated and the
file number starts from 0001.
• A folder number between 100 and 999 can be assigned.
The folder number should be reset before it reaches 999. We recommend formatting the card
(P31) after saving the data on a PC or elsewhere.
• To reset the folder number to 100, format the card first and then use this function to reset the
file number.
A reset screen for the folder number will then appear. Select [Yes] to reset the folder number.
Saves the file with an automatically created name
[OK]
displayed on the screen.
Allows you to rename the file before saving it.
• Available characters: alphabet (upper case characters)
and numbers; up to 8 characters
file name]
• For information on how to enter characters, refer to P64.
• Data registered with [Face Recog.]
• [Clock Set]
• [World Time]
• [Travel Date]
• [Wi-Fi Setup] in [Wi-Fi]
• [Bluetooth]
• [Monitor Display]
243
• [Viewfinder]
• [Activate]
• [Level Gauge Adjust.]