Start-Up With The First Start Assistant On An Assistant Panel; Safety; Hints On Using The Assistant Control Panel; First Start Assistant Guided Settings:language, Date And Time, And Motor Nominal Values - ABB ACS580-01 Quick Installation And Setup Manual

Start-up with the First start assistant on an assistant panel

Obey the safety instructions on page
Check the installation.
Check that the starting of the motor does not cause any danger.
De-couple the driven machine if there is a risk of damage in case of an incorrect
direction of rotation.

Hints on using the assistant control panel

The two commands at the bottom of the display
(in the figure on the right, Options and Menu),
show the functions of the two softkeys
located below the display. The commands
assigned to the softkeys vary depending on the
context.
Use keys , ,
and/or change values depending on the active
view.
Key ? shows a context-sensitive help page.
1 – First start assistant guided settings:
Language, date and time, and motor nominal values
Have the motor name plate data at hand.
Power up the drive.
The First start assistant guides you through the
first start-up.
The start-up begins automatically. Wait until the
control panel enters the view shown on the right.
Select the language you want to use by
highlighting it and pressing
EN – Quick installation and start-up guide 15

Safety

9 during the start-up procedure.
and
and to move the cursor
(OK).
EN
DE
ES
FI
FR
IT
NL
RU
SV
TR
ZH
xx
xx