Sony KDE-P37XS1 Operating Instructions Manual page 28

RGB CENTRING
This option is only available if an RGB source has been connected to the Scart connectors
2/ on the rear of TV.
When viewing an RGB signal, the picture may need some adjusting. This option allows you to adjust the horizontal
picture position so that the picture is in the middle of the screen.
To do this:
Once you have entered the "Features" menu as it is explained in on page 26 and while watching an RGB source select
the "RGB Centring" option and press OK. Then press
+15. Finally press OK to confirm and store.
SCREEN SAVER
This sub menu allows you to reduce the image retention.
If the following images are displayed for an extended period time, image retention (afterimage) in areas of the
screen may result due to the characteristics of this display panel:
• Black bars at the top and bottom that appear with a wide video source (letterbox picture).
• Black bars to the left and right that appear with a 4:3 video source (conventional TV broadcast).
• Video game sources.
• PC images.
• DVD on-screen menu displays.
• On-screen menus, channel numbers, etc..of connected equipment such as Set Top Box, cable modem,
VCR, etc...
To do this:
Once you have entered the "Features" menu as it is explained on page 26 and after selecting the option, press OK.
v V
Next press to select:
or
All White Select this option and press OK. Next press
• This function finishes automatically after 30 minutes. If image retention is still present,
• To cancel this function halfway, press any buttons (except the sound related buttons) on
Orbit Select this option and press OK. Next press
LOGO ILLUMINATION
This option allows you to illuminate the SONY logo located on the front of the TV.
To do this:
Once you have entered the "Features" menu as it is explained on page 26 and after selecting the option, press OK.
v V
Next press to select Yes if you want to illuminate the Sony logo in blue. Finally press OK to store.
or
28
TV Functions
repeat the above.
the remote control.
v V
or to adjust the centre of the picture between –15 and
v V
to select On to turn the screen to white.
or
v V
to select On to move the picture position.
or
1/ or
continued...