Sony KDE-P37XS1 Operating Instructions Manual page 32

MANUAL PROGRAMME PRESET
This option allows you to:
a)
Preset channels or the VCR channel one by one to the programme order of your choice.
To do this:
1
Once you have entered the "Set Up"menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press OK. Next with Programme option highlighted press OK.
v V
Press or to select which programme number you want to preset the channel on (for VCR, select
programme number "0"). Then press
2
After selecting the Channel Number option, press OK. Then press the number buttons to enter directly the
channel number of the TV Broadcast or the channel of the VCR signal. If you do not know the channel
b
number, press and
store.
Repeat all the above steps to tune and store more channels.
b)
Label a channel using up to five characters.
To do this:
Once you have entered the "Set Up"menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press OK. Next with the Programme option, highlighted press the PROG +/- button
to select the programme number with the channel you wish to name. When the programme you want to name
appears on the screen, press
v V
highlighted, press ,
b
to select the word "End" on the screen and finally press OK to turn off the menu from the screen. Finally press
OK to store.
• To correct a letter, select "
• For a blank, select " " on the screen and press OK.
c)
Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture,
however you can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this:
While watching the channel (TV Broadcast) you wish to fine tune, and once you have entered the "Set Up" menu
as it is explained on page 30 and after selecting the "Manual Programme" option, press OK. Then press
to select the AFT option and press
press OK twice to store.
d)
Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this:
Once you have entered the "Set Up" menu as it is explained on page 30 and after selecting the "Manual
Programme Preset" option, press OK. Next with the Programme option highlighted, press the PROG +/- button
to select the programme number you want to skip. When the programme you want to skip appears on the screen,
v V
press or to select the Skip option and press
confirm and store.
To cancel this function afterwards, select "Off" instead of "On" in the step above.
32
TV Functions
B
.
v V
or to search for it. When you have tuned the desired channel, press OK twice to
v V
or to select the Label option and press OK. Then, with the first element
B b
, or to select the letter, next press OK. When you have finished, press
%
" on the screen to go back and press OK.
b v
. Next press
b
V
or to adjust the fine tuning between -15 and +15. Finally
v V
. Next press or to select On. Finally press OK twice to
v V B
, , or
v V
or
continued...