Advertisement
Fleck 5600 SXT Digital Water Softener System Installation Manual
Water Softener Tank Assembly and Valve Installation (continued)
Water Out
Bypass Valve - Top View
Next install the Bypass Valve into your existing water lines.
Make sure that your "Water In" always goes into the right-
side of the Bypass as if you were looking at the Bypass
from a top view.
2.) Insert the Control Valve into place with the Bypass
and then fasten with the clips. Make sure not to pinch
the O-ring that are on the valve ports. Turn handle so it's
pointing toward bypass.
800-767-8731
Water In
(Connected to your water supply)
5
1.) Unscrew the clips from the back of the Control Valve
before you move the Control Valve into place with the
Stainless Steel Bypass that you just installed into your
water lines.
3.) Ensure that the measurements match the height of the
valve ports in the back of the Control Valve.
Then plumb to valve.
(Connected to your water supply)
www.aquascience.net
Advertisement
