Download Print this page

Aqua Science Fleck 5600 SXT Installation Manual page 8

Digital water softener system
Hide thumbs

Advertisement

Fleck 5600 SXT Digital Water Softener System Installation Manual
Brine Tank Assembly (continued)
1.) Screw the valve connection assembly to the
control valve.
3.) Thread the Barb into the drain port of the control valve.
Note: Typically comes assembled by Aqua Science
800-767-8731
4.) Insert the backwash line onto the barb.
It will be a snug fit. You will have to use a little
force to get it all the way on.
8
2.) Snug using an adjustable wrench.
NOTE: If you have to install the disk button, you will need
to remove the valve button in order to place the disk button.
This will screw out. Be sure not to pry it out. I could cause
damage to the unit.
Place the disk button in first with the rounded inside edges
facing down and then replace the valve button behind the
disk button.
Backflow Reducer Button
(Install direction)
Button
Retainer
Disk Button
www.aquascience.net

Advertisement

loading

  Related Manuals for Aqua Science Fleck 5600 SXT

This manual is also suitable for:

Fleck 2510 sxt digital