Hyundai Genesis 2016 Owner's Manual page 465

Hide thumbs Also See for Genesis 2016:

Table of Contents

We recommend that the headlamp

aiming be adjusted after an accident

or after the headlamp assembly is

HYUNDAI dealer.

■ Headlamp (BI-FUNCTION)

1.Turn off the engine.

2.Open the hood.

3.Remove the socket from the

assembly by turning the socket

counterclockwise until the tabs on

the socket align with the slots on

the assembly.

4.Remove the bulb from the socket

by pressing it in and rotating it

counterclockwise until the tabs on

the bulb align with the slots in the

socket. Pull the bulb out of the

socket. (Bulb type)

Remove the connector (A) and pull

FUNCTION type)

5.Insert a new bulb by inserting it into

the socket and rotating it until it

locks into place. (Bulb type)

Connect the BI-FUNCTION lamp

to the cable and install the connec-

tor (A). (BI-FUNCTION type)

6.Install the socket in the assembly

by aligning the tabs on the socket

with the slots in the assembly.

Push the socket into the assembly

and turn the socket clockwise.

Chapters

Table of Contents